Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CHANGING ORIFICES
1. Remove the grate cover, grate, burner cap(s), and drip tray from the side burner. Remove the
control knob(s) and the 4 Phillips head screws securing the control panel to the side burner.
EN
Carefully tilt down the control panel and pull off the connectors to the light switch. Remove the
control panel and set aside.
2. Reach inside the burner to hold up the orifice holder against the burner bowl (to prevent it from
falling) and remove the 2 Phillips head screws securing the burner base. Continue to hold the
orifice holder against the burner bowl and temporarily reinstall the 2 Phillips head screws back
onto the orifice holder so it doesn't fall.
2
©2020 Hestan Commercial Corporation
Publicité
Table des Matières
