Instructions For Assembly; Safety And Maintenance - Dutchblue 7508 Mode D'emploi

Bath chair without backrest
Water-permeable bath chair without backrest, anti-slip seat and non-slip knobs on the feet.
Material: Powder-coated aluminum frame. 5-way height adjustable seat.
Maximum user weight 100 kg. Ideal for every shower.
Composition
Item Description
1 Upper tube
2 Bottom tube
3 Telescopic tube
4 Screw
5 Vaulted washer
6 Spring pin
7 Seat board

Instructions for assembly

1. Assemble together the top and bottom tubes according to image 1.
2. Place the seat downward horizontally and place the two fixed tubes into the groove, making
sure that marking 1 corresponds to marking 1 and marking 2 corresponds to marking 2 as
shown in image 2. Insert and tighten all screws.
3. Place the chair properly and adjust equally the telescopic tubes to suitable length and make
sure the spring pin is in place before sitting on.
1

Safety and maintenance

Before use, check degree of tightness of all screws and stability of the frame, dont overload
100 kg. Clean it frequently and disinfect it in periodic time. Place it in dry and ventilated
environment.
ENGLISH
Model Quantity
1
1
4
5
M6x35
Ø6 5
Ø8 4
1
2
dutchblue.
corresponding
marks
com
3
3