Switching On/Off - HAIRCUT EASY'GLAM BSI4 Guide De L'utilisateur

All manuals and user guides at all-guides.com
EN
3 Use

3.1 Switching on/off

Insert the electrical lead into the mains power socket.
"OFF" is displayed on the display (item A, figure 1)
To switch the equipment on:
Press the On button
The display (item A, figure 1) displays flashing "180". The value
displayed increases gradually for about 3 minutes until it reaches 180°,
the default temperature.
To switch the equipment off:
Press the Off button
displayed on the display (item A, figure 1)
The equipment automatically switches off after 60 minutes without use.
3.2 Adjusting temperature
By default the temperature is set at 180°C. The
to choose another temperature between 120°C and 230°C.
Briefly press the
Continue with short presses on the
temperature is displayed: the value increases 10 by 10 up to 230°C, then
starts over again at 120°C.
After 2 s without pressing the flashing stops. The real temperature goes
to the set value.
3.3 Locking the temperature setting
Once the set temperature has been reached, you can lock the temperature
setting. Simultaneously press the
Unlocking is done in the same way.
3.4 "Ionic" function
The "Ionic" function allows you to reduce the static electricity while you are
brushing your hair.
Set the "Ionic" button to ON (item I, figure 1).
The blue LED comes on (item H, figure 1) when the ionizer is functioning.
for a few seconds (item C, figure 1)
for a few seconds (item C, figure 1). "OFF" is
push-button: the temperature flashes.
and
18
push-button allows you
push-button until the desired
push-buttons for 2 seconds.