Switching On/Off - HAIRCUT EASY'LISS BSI3 Guide De L'utilisateur

EN
2 Description
Refer to Figure 1
Ref. Designation
A. 360° rotating electrical lead
Multi-function button
B.
(On/Off – Temperature setting - Temperature validation)
C. Temperature setting bar graph
D. Blue LED (ionizer operating)
E. Red LED (infrared system operating)
F. Electrically heated hairbrush
G. End thermal protection
3 Use

3.1 Switching on/off

Insert the electrical lead into the mains power socket.
To switch the equipment on:
Hold the On/Off button down for a few seconds
The blue LED (ref. D, figure 1) and the red LED (ref. E, figure 1) come on.
The ION (ionizer) and infrared technologies start up automatically.
The bar graph (ref. C, figure 1) lights up in sequence for about 30 seconds
(equipment cold) until a default temperature of 200° has been reached.
To switch the equipment off:
Hold the On/Off button down for a few seconds
The equipment automatically switches off after 60 minutes without use.
3.2 Adjusting temperature
By default, the temperature is set to 200°C.
Select the temperature on the bar graph by pressing the button
Possibility of 5 temperature levels (120°, 140°, 160°, 180°, 200°).
18
briefly.