Filling The Kettle; Boiling Water - Thinkkitchen RETRO Mode D'emploi

Bouilloire électrique
Masquer les pouces Voir aussi pour RETRO:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Select a level surface where this unit is to be used allowing enough space
for steam to escape without damage to counters, cabinets and walls.
Fill kettle to maximum fill line with cold water. Bring to boil, discard and
repeat. Kettle is now ready for use.
Note: The kettle only operates when placed on the base with the ON/ OFF
(I/O) button in the ON (I) position. The kettle automatically shuts off when
water has boiled or there is no water in the kettle.
IMPORTANT:
Do NOT fill the kettle with any substance other than water. Heat water only.
Do NOT operate the kettle without water.
Do NOT operate the kettle without the filter in place.
Do NOT overfill the kettle. (Keep water level below the max fill line on the
water window.)

FILLING THE KETTLE

1.
Remove the kettle from the base.
2.
Pull lid handle up to remove the lid.
3.
Make sure the removable filter is in place.
4.
To install: put filter in kettle, aligning the filter circle with the inside/ back
of the pour spout.
5.
Fill with desired amount of cold tap water. Use the water window on the
outside of the kettle as a guide for 4 cups up to 1.7 liters (7 cups).
6.
Put the lid back on the kettle.
7.
Unwind cord from base.
8.
Place the kettle securely on the base.

BOILING WATER

1.
Plug cord on the base into standard electrical outlet.
2.
Press the On/Off (I/O) switch to the On (I) position. The power indicator
light turns on and the water begins to heat.
3.
When water boils, the kettle and the power indicator light will automati-
cally turn off.
Note : Note: You can also turn the appliance off at any time by lifting the ON/
OFF (I/O) switch to the OFF (O) position.
Warning: Lettle filled with boiling water is hot. Use only the handle to pick it
up. When taking kettle to the table, carry kettle with caution to avoid spilling.
Set it on a trivet or hot pad to protect the table surface or tablecloth.
Important : Hold kettle handle firmly when pouring, especially when filled to
the max fill line. Do not pour too fast.
Unplug the kettle when not in use.
9

Publicité

Table des Matières
loading

Table des Matières