Making The Wheelchair Smaller - Revab CANTO NXT Mode D'emploi

All manuals and user guides at all-guides.com
fig. 5

Making the wheelchair smaller

Removing the seat (see fig. 1)
1. Pull up the back of the seat.
2. Lift the seat out of the frame.
Remove the backrest from the backrest frame
(see fig. 2)
1. Lift the left and right knobs of the top
fig. 1
fittings at the same time.
2. Rotate the backrest forward so that
the U profile releases from the backrest
attachment points.
3. Release the knobs of the top fittings.
4. Lift out the backrest.
fig. 2
Removing the legrests (see fig. 3)
1. Loosen the star knob which attaches the
fig. 3
legrests to the seat frame.
2. Pull the legrests out towards you.
Side equipped with armrest (see fig. 4)
1. Loosen the star knob at the bottom of
the sides.
2. Lift the entire side upwards out of the seat
frame.
Removing the headrest (see fig. 5)*
1. Loosen the star knob.
2. Remove the headrest from the wheel-
chair.
Backrest tubes (see fig. 6)
1. Loosen the socket screws in the backrest
fig. 4
hinge points.
2. Move the backrest frame towards the seat
frame.
3. Retighten the socket screws.
fig. 6
* If applicable
GB23