ALPATEC HU 62 E Mode D'emploi page 11

All manuals and user guides at all-guides.com
notice_hu62E:notice_hu60.1_et
Trouble
LCD screen does not - Is there a problem with power
light on.
There is no mist
LCD screen lights on but - No water in the tank.
there is no mist
The mist spray has an - The appliance is new.
unpleasant smelling.
- The water is dirty or has been too
Mist volume is low - The transducer is dirty.
- Water is dirty or has been too much
There is a strange noise - Water tank is not properly placed
- Water level in the tank is too low.
- Add water.
5/02/09 11:06 Page 11
TROUBLE SHOOTING TROUBLE SHOOTING
Possible problem
supply ?
much time in the water tank.
time in the water tank.
on the base.
11
Treatment
- The plug is not connected to the
socket.
- Add water.
- Open the water tank, lay it for 12
hours in a stady and cool place.
- Clean the water tank and add clean
water.
- Clean the transducer as described
in cleaning instructions.
- Clean the water tank and add clean
water.
- Set the water tank properly.