Cleaning And Maintenance - ALPATEC HU 62 E Mode D'emploi

All manuals and user guides at all-guides.com
notice_hu62E:notice_hu60.1_et
MODE :
• Press mode key (12). Once to select mode I (constant and large mist), twice to select mode II
(constant and middle mist), three times to select mode III (constant and small mist).
TIMER :
• Press timer key (11) to program the appliance for 2 hours, 4 hours, 8 hours or 12 hours.
• If the water tank is empty, waterless light indicator lights on and a warning bip sounds.
• Clean the transducer with descaling detergent. Take out the water tank from the base, empty the
base and drop 10 ml of descaling detergent on the transducer. (See picture below)
• Wait about 2 to 5 minutes then wash with a brush and rinse plentifully with clear water.
• To clean the water tank, file it half and add soft detergent. Screw the tank cap and shake it up and
down several times, and then use water to rinse.
• If there is waste left in water flume, clean it with a damp cloth and detergent, then rinse with water.
• If the humidifier has not been working for a long time, clean it as described above.
• Cleaning of the descaling cartridge: take out the cartridge and soak it into salt liquid (one big spoon of
salt in a glass of water) for about 60 minutes. Rinse with clear water and replace in the product.
5/02/09 11:06 Page 10

CLEANING AND MAINTENANCE

CLEANING AND MAINTENANCE
10
TRANSDUCER