Product Features; Product Installation - Ecco EC4204-SK Instructions D'installation

Specifications:
Number of Sensors: 4 PCS
Color of Sensors: Black
Ultrasonic Frequency: 40KHz
Detecting Distance: 0.30-1.50m (1ft 0in-5ft 0in)
Display Unit: M or FT optional
Voice Warning: Optional
Camera Volume: Adjustable
Power Supply: DC 10-18V
Operating Temperature: -20 °C-70 °C RH 95% Max
Storage Temperature: -40 °C-80 °C RH 95% Max

Product Features:

1. The reversing sensor system consists of a control box, 4 proximity sensors, a speaker and cables.
2. When correctly installed the system will operate automatically when reverse gear is engaged. The direction & distance from the object
behind the vehicle will display on the monitor screen.
3. An audible alert will sound when the vehicle gets too close to any barriers like vehicles, objects, etc.

Product Installation:

Sensors
1. Choose a proper place for trial installation.
Suggestion: *17.5-21.5 inches (44-55 cm) above the ground at even heights along the bumper
*The distance between sensors should be determined according to the width of the rear bumper.
*Choose the right place for the sensors to achieve best detecting angle.
2. Hole diameter should be 7/8 inches (22mm).
3. Securely mount the sensors (with cables) into the holes.
920-5204-00 Rev. C Page 2 of 5