To Use The Battery Pack; Utilisation Du Bloc Batterie - Samsung Hi8 SCW97 Manuel D'instructions

Table des Matières

Publicité

ENGLISH
Preparing

To use the Battery Pack

How long will the battery last for recording?
Depends on how often you are likely to use the
zoom feature during recording.
Recharging the Battery Pack
1. Attach the battery pack to
the camcorder.
2. Connect the AC Power Adapter
to the AC cord and connect the
AC cord to a wall socket.
3. Connect the DC cable to the
DC jack of the camcorder.
4. Turn off the camcorder power,
and the recharging indicator
will start blinking and begin
recharging.
-
Blinking once a second :
Indicates less than 50%
has been charged.
-
Blinking twice a second :
Indicates 50% ~ 75% has
been recharged.
-
Blinking three times
a second : Indicates
75% ~ 100% has been
recharged.
-
Blinking stops and stays on :
Recharging has been completed.
-
On for a second and off for a second : Indicates
there is an error.
Reset the battery pack and DC cable.
5. If recharging is completed, separate the camcorder,
AC power adapter, and battery pack.
-
Even if the power is turned off, battery will be
discharged.
Note: Battery pack may be charged a little at the time of
purchase.
18
Réglage du caméscope

Utilisation du Bloc Batterie

Durée d'enregistrement
Recharge du bloc batterie
1. Installez le bloc batterie sur le caméscope.
1
2
3
4
OFF
5. Si la batterie est entièrement chargée, retirez l'adaptateur
Remarque: le bloc batterie peut être déjà en partie chargé à
✤ De la fréquence d'utilisation du zoom.
Par conséquent, disposez de plusieurs blocs.
2. Connectez l'adaptateur secteur
à un câble d'alimentation
et branchez ce câble sur
une prise murale.
3. Branchez le câble DC à la prise
DC du caméscope.
4. Éteignez le caméscope, le
voyant de charge se met alors
à clignoter et la charge
commence :
- s'il clignote une fois par
- s'il clignote deux fois par
- s'il clignote trois fois par sec-
- si le voyant reste allumé, la
- s'il s'allume pendant une seconde et s'éteint pendant une
seconde, cela signifie qu'un incident s'est produit.
Réinitialisez le bloc batterie et le câble DC.
secteur et le bloc batterie du caméscope.
- La batterie se décharge, même lorsque l'alimentation
est coupée.
l'achat.
FRANÇAIS
seconde, moins de 50 % de
la batterie a été rechargé ;
seconde, 50 % à 75 % de
la batterie a été rechargé ;
onde, 75 % à 100 % de la
batterie a été rechargé ;
batterie est totalement
rechargée ;

Publicité

Table des Matières
loading

Table des Matières