In Case Of Disfunction; Technical Characteristics; Warranty - JARDIBRIC KPBRU20 Notice

EN
3
/

IN CASE OF DISFUNCTION :

1. After having plugged in the device, look at the control panel to check if the 'Batt.' LED blinks. If
it is not blinking, check if there is power.
2. After having plugged in the device, if the 'Batt.' LED flashes but the misting system is not work-
ing, check that you have opened your tap.
3. If the water is circulating but the mist is hardly coming out of the nozzles :
a. There may be a leak in the circuit. Check that the hoses are correctly connected to the
mist pump.
b. There may be air in the mist hose. Slightly open the purge to let the air quit the tube, then
close it once the misting has started.
c. One of the nozzles may be obstructed or be damaged. Replace it with a new nozzle (
4
/

TECHNICAL CHARACTERISTICS :

Adapter :
Input : 100-240V, 50/60 Hz
Output : 24 V, 2A
Misting pump :
• Operating voltage :
• Amperage : ≤ 1,5 A
• Operating current : ≤ 20 mA
• Power : 40 W
• Type of opening : piston pump (stainless)
• Motor frequency : 2300 rpm
• Motor : DC brush
• IP / Water projection : IPX4
• Temperature range : from 0°C to 20°C
• Water inlet pressure : from 0,5 bar to 5 bars
• Pressure returned by the pump : 40 bars
• Flow rate : 0,15 L/min
5
/

WARRANTy :

The warranty period (Law 1999/44 EC) in accordance with the terms described below is 2 years
from the date of purchase, with regard to parts and repair, for defects in manufacturing and
material.
The warranty does not include :
• Natural wear and tear due to use.
• Misuse or inappropriate use. Damage caused by an intervention carried out by personnel who
would not be authorized by Jardibric or by the use of spare parts which are not original.
In the event of incident, the warranty must be correctly completed: containing all the required data
and sent with an invoice or a purchase receipt from the seller's establishment.
12
100-240V
).
H