Subnet Mask - Mark PinTherm Connect Livret Technique

5.20 IP settings
select
DHCP - automatic assignment IP address
Static - set fixed IP address

SUBnet Mask

5.21 Control PinTherm Connect via Ethernet
After setting the IP address, it is possible to remotely control and change the PinTherm Connect
via the web browser on your mobile phone, tablet or laptop / PC. To do this, enter your set IP
address in the address bar of the browser. Then log in with the following information:
Username: pintherm
Password: 1000
Setting or changing the parameters is possible via the screens below in the web browser.
14
IP SETTINGS
IP ADDRESS
192.168.001.100
changes the
flashing digit
to go one digit up
IP MODE
STATIQ
OK
change setting
SUBNET MASK
255.255.255.000
changes the
flashing digit
to go one digit up
OK
OK
back to the
menu