Conrad TE831X Notice D'emploi page 67

d) Selecting the function
If the weather station is in normal operation (e.g. not when setting the alarm time or searching for a sensor or similar),
you can select the individual functions by briefly pressing the button " " (6) or " " (7).
The selected function blinks on the display. Additional settings and displays are possible for each function. These
are explained in the next chapter. Below in the display illustration you can see the position of the symbols and the
respective display section.
A
A Weather (weather forecast, weather trend, air pressure, moon phase, bar diagrams for temperature/air humidity
progression)
B Temperature/air humidity (indoor/outdoor temperature/air humidity, trend display, minimum/maximum value,
°C/°F switching, dew point display, battery symbol for weak batteries in the temperature/air humidity sensor)
C Rain (value memory, switching the measuring unit, battery symbol for weak batteries in the rain sensor)
D Wind (value memory, wind direction display in degrees or text, wind speed, wind-chill temperature, battery
symbol for weak batteries in the wind sensor)
E Sunrise/sunset time
F Time/Date (manual setting, language selection for weekday display, 12/24h mode, alarm function, pre-alarm,
battery symbol for weak batteries in the weather station)
A
F
RAIN
WIND
C
B
RAIN
E
D E
B
C D
F
mm
67