Cleaning And Maintenance - APEXRA APHP-12-2 Manuel D'entretien, D'installation Et D'utilisation

CLEANING AND MAINTENANCE

CAUTION
Before cleaning, turn off all valves, including gas supply valve, and allow unit to cool to room temperature.
Note: Use
only non-abrasive
making it susceptible to
chlorine, iodine, ammonia
life of the unit. If the stainless
Initial Cleaning - Prior to first operation.
Thoroughly wash exterior of
Daily Cleaning
1. Thoroughly
2. Clean grates daily with a stiff brush.
Weekly Cleaning
1. Clean unit thoroughly. Clean
cloth. A mild
2. To remove the drip pan,
3. Burner air shutter openings must
WARNING
A qualified service technician must handle all maintenance and repair.
CAUTION
For your safety and to ensure proper operation, only use service and repair parts purchased from the manufacturer. If you have
any questions or problems contact you nearest Service Representative. All burner control valves must be checked and lubricated
periodically by a qualified service technician
cleaners. Abrasive cleaners could scratch the
dirt accumulation. Do not use steel
or bromine chemicals as
steel surfaces become discolored,
unit using a mild detergent.
clean back, sides, top and front of unit, using a mild detergent if necessary.
stainless
detergent may be used. To remove
pull by handle through the opening
wool, other
these will deteriorate the stainless steel
scrub by rubbing only in
steel or chromed surfaces with a damp cloth and polish with a soft, dry
discolorations,
in the front panel.
Page 12
finish of your unit, marring
abrasive cleaners or cleaners/sanitizers containing
and glass material and shorten
the direction of
use a non-abrasive cleaner.
its appearance and
the
the finished grain.