Honeywell Home T6 Pro Hydronic Guide De L'utilisateur page 4

Masquer les pouces Voir aussi pour T6 Pro Hydronic:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Program schedule
You can program four time periods each day, with different settings for weekdays
and weekends. We recommend the pre-sets (shown in the table below), since they
can reduce your heating expenses.
Wake - Set to the time you wake up and the
temperature you want during the morning, until
you leave for the day.
Away - Set to the time you leave home and the
temperature you want while you are away (usually
an energy-saving level).
Home - Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the
temperature you want overnight (usually an
energy-saving level).
NOTE: To temporarily or permanently override any
of the above program schedules, see page 5.
Depending on which temperature control mode the thermostat is configured
for (see page 2), you will be programing either air or floor temperature. Floor
temperature will be indicated with FLR text above the actual temperature value.
To adjust program schedules
1
Press Menu on your thermostat.
2
PROG is displayed. Press Select. Then ON
is displayed. (If you do not want to use a
schedule, press
Select.) Press Select.
3
Press
or
edit. Press Select.
4
Press
or
edit (Wake, Away, Home, and Sleep). Press
Select.
5
ON is displayed. Press Select to keep the
schedule period on. Or press
to turn off the schedule period.
6
Time starts blinking. Press
the schedule period start time. Press Select.
7
Temperature starts blinking. Press
adjust the "Heat" setpoint temperature. Press
Select.
8
Repeat steps 4 through 7 for the remaining
schedule periods.
9
Press Home when you're finished to save and
return to the home screen.
10 Schedule can be adjusted and turned ON or
OFF by returning to Menu and following the
steps provided above.
to display OFF. Press
or
to select day or set of days to
to select a schedule period to
or
and then Select
to adjust
or
to
4
Air
Temperature
(A mode/
AF mode)
Wake
70
(6:00 am)
Away
62
(8:00 am)
Home
70
(6:00 pm)
Sleep
62
(10:00 pm)
Floor
Temperature
(F mode)
°
°
82
°
°
68
°
°
82
°
°
68

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Th6100af2004

Table des Matières