Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
COMPLETING THE INSTALLATION
INSTALL FRONT WHEEL
Align the wheel in the front axle and secure it paying attention to
the disc brake. With hydraulic brakes, remove the red plastic and
avoid pressing the brake lever before inserting the disc brake into
the brake caliper.When inserting the front wheel, make sure that
the disc on the left side is properly inserted in the brake caliper.
Press the front brake lever to apply pressure to the disc so that the
wheel is properly centered and locked. Screw the «Quick Release»
until the wheel is solid and well in place Do not activate the brake
lever until the disc is in place.
Owner's Manual
34
Publicité
Chapitres
Table des Matières
