NetComm Wireless 3G27WV-02 Guide De Démarrage Rapide page 6

5.
Select disable from the Auto-APN drop down menu.
6.
Enter the 3G/4G service details as supplied by your 3G/4G service
provider. This may include the APN, username / password, or dialled
number. Leave any fields which are not required blank.
7.
Once the correct details are entered, click the Save button.
8.
The router will now attempt to connect using the details you have entered.
This can take up to 2 minutes.
9.
If you are successfully connected the blue 3G/4G light on the front of the
unit will be lit.
Making and receiving voice calls
Your router allows you to make voice calls over the cellular wireless network.
1.
Ensure your SIM card is activated on a plan that supports both data and
voice (Internet and Phone) service for your router.
2.
Plug a standard home phone into the Line 1 or Line 2 phone port on the
back of the device.
The corresponding Phone light on the front edge of the router will turn on and
you will be able to hear a dial tone on your phone.
When an incoming call is received, both Line 1 and Line 2 lights will start
flashing and the phone(s) connected to the router will ring.
If the call is answered from the phone connected to Line 1, the phone
connected to Line 2 will receive an engaged tone for the duration of the call.
Note: In the event of a power outage, voice services will not function.
NetCommWireless