Hardware Setup - NetComm Wireless 3G27WV-02 Guide De Démarrage Rapide

THANKS FOR PURCHASING
NETCOMM WIRELESS
This quick start guide is designed to get you up and running quickly with
your new router. More advanced set up instructions can be found in the user
manual which can be downloaded from www.netcommwireless.com

Hardware setup

1.
Insert your activated SIM card (until you hear a click) into the SIM slot.
2.
Attach the supplied antenna to the connector labeled Antenna on the
rear panel.
3.
Connect the power adapter to the power socket on the back of
the router.
4.
Plug the power adapter into the wall and power on.
5.
Wait approximately 60 seconds for the router to power up.
Connecting to the router - via cable
6.
Connect the supplied yellow Ethernet cable to the LAN port at the back
of the router.
7.
Connect the other end of the yellow Ethernet cable to your computer.
8.
Wait approximately 30 seconds for the connection to establish.
NetCommWireless