V-TAC VT-5157 Instructions D'installation page 7

ENGLISH
FIGURE 15
FIGURE 13 FIGURE 14
B. ADDITION OF AP HOTSPOT
• Tap on "addition of AP Hotspot" (Ref Figure 9).
• Please refer to "TIP" before tapping on "Go to setting".
After you hear the sound from camera "Please configure camera by AP hotspot or by
scanning code" tap on "Go to setting" (Figure 10)
• Tap on "Go to Setting" (Figure 16) button then Select the camera hotspot named with
"CLOUDCAM_XXXX" (Figure 17). After connecting the camera then go back to the app and
Tap on "Next" (Figure 18).
FIGURE 18
FIGURE 16 FIGURE 17