Getting Started; Manual Time Settings - LEXIBOOK TimeProjector RP200 Guide De L'utilisateur

GETTING STARTED

When you use the RP200 for the first time:
1. Remove the plastic static label on the screen display.
2. Open the battery door located on the underside of the unit.
3. Insert 4 AA batteries according to the polarities (+/- signs).
SETTINGS
Clock
RCC Clock (Radio Controlled Clock)
1. The RP200 is designed to automatically synchronize its calendar
clock once it is brought within a range of 1500km of the Frankfurt
DCF77 radio signal. When the RP200 is brought within this range,
its auto-control mechanism will override all manual settings.
2. The clock automatically starts scanning the RF 433MHz signal
after new batteries are inserted in the main unit. When receiving
the RF 433MHz radio signal, the Radio Tower symbol
to blink. A complete reception generally takes about 10 minutes,
depending on the strength of the radio signal.
3. When the reception is complete, the Radio Tower symbol
stop blinking and remain solid.
4
All manuals and user guides at all-guides.com
starts
will
4. For an optimal reception, place the clock away from metal objects
and electrical appliances (i.e. television, computer, monitor, etc) to
minimize interference.
Notes:
• The unit will receive the RCC signals every day at 2am.
• The RCC signal can also be triggered by holding the
seconds in time mode.
• When the unit is searching or receiving the RCC signal (which lasts
about 5 minutes), none of the keys is working except the
• Press and hold the key for 2 seconds if you wish to stop to the
RCC signal search.
If the RP200 is brought outside the range of the Frankfurt DCF77
radio signal or if the signal is interfered, please set the time and date
manually according to the instructions below. If the unit is located
within the radio-controlled range, you may want to customize some
of the clock settings.
Note: When no key is pressed for more than one minute, the unit
returns to time mode (time, date and temperature display).

Manual Time Settings

1. In time mode, hold the [SET] key for 2 seconds until the seconds
digits flash.
2. Press the or keys to reset the seconds. Press [SET] to confirm.
3. The hour digit flashes. Press the
4. Press [SET] to confirm. The minutes' digits flash.
5. Press the or keys to adjust the minutes. Press [SET] to confirm.
6. The year digits flash. Press the
7. Press [SET] to confirm. The month's digit flashes.
8. Press the or keys to adjust the month. Press [SET] to confirm.
9. The day's digit flashes. Press the
10. Press [SET] to confirm. The 12/24 hour digit flashes.
11. Press the or keys to toggle between the 12 hour (am/pm) and
24 hour time display. Press [SET] to confirm.
12. The language flashes. Press the
language in which the date will be displayed (French, English,
Portuguese, German, Spanish or Italian).
13. Press [SET] to confirm and end your settings.
key for 2
key.
and keys to adjust the hour.
and keys to adjust the year.
and keys to adjust the day.
or keys to select the
5