Haussmann XTCD-14 Guide De L'utilisateur page 9

All manuals and user guides at all-guides.com
TABLE OF CONTENTS
SCHEMATIC DRAWING
PARTS LIST
IMPORTANT SAFETY INSTRUCTIONS
SPECIFICATIONS
OPERATION
MAINTENANCE
WARRANTY
WARNING! The warnings and precautions discussed in the manual cannot cover all
possible conditions and situations that may occur. It must be understood by the user
!
that common sense and caution are factors which cannot be built into this product,
but must be supplied by the user.
SAVE THIS MANUAL: Keep this manual for the safety warning, precautions,
!
operations, inspection and maintenance instructions. Keep the manual and the
receipt in a safe and dry place for future reference.
WARNING! To avoid serious personal injury, do not attempt to use this product until
! you read the manual thoroughly and understand it completely. Save this manual
and review frequently for continuing safe operation and instructing others who may
use this tool.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! When using tools, machines or equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal injury.
!
Completely read the manual before proceeding to use this tool. KEEP THESE
INSTRUCTIONS.
1. KEEP YOUR WORK AREA CLEAN AND WELL LIT. Cluttered benches and dark
areas invite accidents.
2. CONSIDER WORK AREA ENVIRONMENT. Don't use tools in damp, wet or poorly
lit locations. Don't expose your tool to rain. Keep the work area well lit. Don't use
tools in the presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. All children should be kept away from the work area.
4. STAY ALERT. Watch what you are doing & use common sense. Never operate
equipment if you are tired.
5. DO NOT OPERATE THE PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL
OR DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes might be impaired.
6. DRESS PROPERLY. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Wear restrictive hair covering to contain long hair and keep it from
harm.
7. EYE, EAR & LUNG PROTECTION. Use a full-face mask if the work you're doing.
Produces metal fillings, dust or wood working. Goggles are acceptable in other
situation. Wear a clean dust mask if the work involves creating a lot of fine or
coarse dust. ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA
REQUIREMENTS or ANSI SAFETY STANDARD Z87.1 FLYING DEBRIS can
cause permanent eye damage. Prescription eyeglasses ARE NOT a replacement
for proper eye protection. Wear a hearing protection if required.
8. DON'T OVERREACH. keep proper footing and balance at all times. Do not reach
over or across running machines.
p.7
p.8
p.9
p.10
p.10
p.11
p.12
9