Adjustment; Central Brush - Dulevo 700 M Mode D'emploi Et D'entretien

7-1 ADJUSTMENT

The manual sweeper is factory-adjusted for the operation on plane and smooth ground.
Therefore, you only need to bring the lateral brush to the operating position.
As a rule, brushes should be adjusted so as to touch the ground with a light pressure.
7-1-1 CENTRAL BRUSH (Fig. 7-1.1)
To adjust the worn main sweeping roll or to use the machine on a non-flat ground, simply rotate the wheel (1)
clockwise or counterclockwise to the requested height.
NOTE:
Before adjusting the central brush, require the loosening of the collar (2).
After adjusting, tighten hard.
NOTE:
A clockwise (+) rotation of the wheel (1) lowers the brush to the floor; a counterclockwise (-) rotation lifts
it.
24
All manuals and user guides at all-guides.com
2
2010-01
SWEEPER 700 M
1
FIG. 7-1.1