Unpacking The Machine; Preparing Of Machine; 5-1.1 Mounting The Handlebar - Dulevo 700 M Mode D'emploi Et D'entretien

All manuals and user guides at all-guides.com
SWEEPER 700 M

4-1 UNPACKING THE MACHINE

Unpack the machine with the utmost care; avoid carrying out any operation that could damage it. Once it has been
unpacked, check whether it is damaged.
If you notice that it is not in correct working order, DO NOT use it and inform your dealer.
WARNING DANGER:
Take care to keep the packaging materials (bags, cartons, pallets, hooks, etc) out of the reach of children.
For packaging and transport purposes, some parts and accessories are supplied disconnected from the machine.
To assemble them, carefully follow the instructions given in the relelative sections.
Contents of the package:
- Machine
- Side brush
- Instructions manual

5-1 PREPARING OF MACHINE

After unpacking the sweeper, install the handle in operating position and the brush on the relative support arm
according to the following procedure:
5-1.1 MOUNTING THE HANDLEBAR (Fig. 5-1.1)
- Unscrew locking wheels (1).
- Lift the handle (2) to the operating position.
- Reposition wheels (1). Make sure to tighten them hard in the proper place on the handle.
1
1
2
FIG. 5-1.1
22 2010-01