Install The Hardware; Install Usb Driver (Usb 2.0 Connection); For Windows 98 Se Users - Archos DEx-CDRW Guide D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1. Install the Hardware

AUDIO
Connect the USB cable to the connector at the back of the DEx-CDRW.
Plug in the power cable into the Power Socket at the back of your DEx-CDRW.
Plug AC/DC power cable into an electrical outlet.

2. Install USB Driver (USB 2.0 connection)

2.1. For Windows 98 SE users

Turn on your computer and Insert the USB cable to an open USB port on your
computer. Follow steps listed below to complete installation:
New hardware found: USB Cable window flashes on the screen, then
1.
Add New Hardware Wizard window will help you to install the new drive.
2.
This Wizard searches for new drivers for: USB Cable, click Next.
What do you want the Windows to do?,
3.
Select Search for the best driver for your device (Recommended).
Click Next..
Where do you want Windows to search for the driver files?
4.
Check Floppy disk drives box, and uncheck all other boxes.
Insert the DEx-CDRW diskette driver in the floppy drive, then click Next.
Windows is now ready to install the best driver for this device. [...]. The
5.
location of the driver is A:\
Click Next.
To close Wizard, click Finish.
6.
All manuals and user guides at all-guides.com
USB
- 6 -
POWER SOURCE

Publicité

Table des Matières
loading

Table des Matières