CARPOINT 0510350 Manuel D'utilisation page 6

Onduleur, convertisseur modifiée
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Input Voltage
10.5V-1 6.0V (12V version) 21.OV-32V (24V version) 42.0V-64V (48V version)
Output Voltage
100-120VAC ±10%, 220V-240VAC ±10%
Output Frequency
50/60Hz ±10%
Efficiency
>80%
Output Waveform
Modified Sine Wave
Protection Features
Low Battery Alarm, Low Battery Shutdown, Over Voltage, Overheat,
Over Load, Short Circuit, Reverse Polarity (Fuse)
Battery Types
Open & sealed lead acid battery
Note: *The specifications are subject to change without prior notice in relation to further product improvements.
8. MAINTENANCE
Very little maintenance is required to keep your inverter operating properly.
You should clean the exterior periodically with a dry cloth to prevent the accumulation of dust and dirt. You should also periodically tighten the
screws on the DC input terminals.
9. WARRANTY
We guarantee this product against material and workmanship defects for a period of one year from the date of purchase by the end user.
This warranty will be considered void if the unit has been misused, altered, or damaged accidentally. We are not liable for anything that
occurs as a consequence of user error.
If the warranty period for your product has expired, the unit was damaged through misuse or incorrect installation, other warranty conditions
have not been met, or if no dated proof of purchase is available, a flat fee will be charged for servicing or replacing your unit.
Appendix: Recommendations
For correct operation, the battery voltage should be between 0.9 x Vnom and 1.29 x Vnom where Vnom is 12V, 24V or 48V depending on the
model, and must be able to supply sufficient current to your inverter. The following table displays the recommended items (battery cable,
Fuse, Battery Capacity) per inverter type :
INVERTER TYPE
150W
300W
600W
1000W
1500W
0510350-62i_A5.indd 6
0510350-62i_A5.indd 6
INPUT VOLTAGE
DC BATTERY CABLE
12V
2.5mm² (1 x Red/1 x Black)
24V
2.5mm² (1 x Red/1 x Black)
48V
2.5mm² (l x Red/1 x Black)
12V
4mm² (1 x Red/1 x Black)
24V
2.5mm² (1 x Red/1 x Black)
48V
2.5mm² (1 x Red/1 x Black)
12V
6mm² (1 x Red/1 x Black)
24V
4mm² (1 x Red/1 x Black)
48V
2.5mm² (1 x Red/1 x Black)
12V
10mm² (1 x Red/l x Black)
24V
6mm² (1 x Red/1 x Black)
48V
4mm² (l x Red/1 x Black)
12V
10mm² (2 x Red/2 x Black)
24V
6mm²' (2 x Red/2 x Black)
48V
4mm² (2 x Red/2 x Black)
FUSE
BATTERY CAPACITY
35A x 1
≥25 Ah
20A x 1
≥15 Ah
10A x 1
≥10 Ah
35A x 1
≥50 Ah
20A x 1
≥25 Ah
10A x 1
≥12 Ah
35A x 4
≥100 Ah
20A x 4
≥50 Ah
10A x 4
≥25 Ah
35A x 4
≥160 Ah
20A x 4
≥80 Ah
10A x 4
≥40 Ah
45A x 4
≥250 Ah
35A x 4
≥125 Ah
20A x 4
≥60 Ah
08-07-2020 08:10
08-07-2020 08:10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0510351051035205103530510354

Table des Matières