Connecting Power - iOttie Auto Sense Guide

Connecting Power

1. Plug the micro-USB cable into the
USB port on the back of the Mounting
Head.
3. Twist Dial to ensure spacers are
secure in the cup holder walls.
2. Insert Car Charger into your
vehicle's power port.
360°
90°
Top half of mount rotates 90
degrees for optimal viewing.
Mount rotates 360 degrees for
optimal viewing angles.
Adjusting the Mount
1. Foot Knob
Out of box, the foot knob is set to
regular sized phones. Foot will need
to be adjusted for plus sized phones
or cases with thicker bottoms.
Using the Auto Sense Mechanism
Once it is unplugged or car is turned off, the Auto Sense's internal battery
keeps a charge for up to one hour.
Mounting and Charging
1. Side arms on mount automatically
open via silent step motor for one
second when phone is detected in
front of Proximity Sensor on mount.
Move the knob down until laser
etching is aligned appropriately as
shown in line drawing.
90% Charged
2. Once phone is placed in mount,
arms will automatically close after
one second. Qi wireless charging
will start immediately.