Hayward ZRD Série Manuel D'installation page 4

Programming menu HAYWARD ZRD
You can access the programming menu by pressing the key for over three seconds. The keys can
be used to run through the menu items, with the key being used to access changes.
The pump is programmed in constant mode in the factory. The pump automatically returns to the operating mode
after 1 minute of no activity. Any data entered in these circumstances will not be saved. The key can be used
to exit the various programming levels. Upon exiting programming, the display will show:
Exit Exit
∇ Δ
No Save Save to confirm the selection
14
Delay Calib.
Hayward Flow Control www.haywardflowcontrol.com
1-888-INDL (1-888-429-4635)
ZRDIOM
Pg. 2 of 11