Table des Matières
Publicité
3. Specification
The following Specification assume a one year calibration cycle and an operating temperature of 64°F to
82°F (18℃ to 28℃)at a relative humidity of up to 80% unless otherwise noted.
3.1 AC Current (Average sensing, calibrated to rms of sine ware)
Range
2000 mA
20 A
600 A
Input impedance: ≥ 9 MΩ
Overload protection: 600A on all ranges.
Max. claw opening: 50 mm (2")
3.2 AC Voltage(Average sensing, calibrated to rms of sine wave)
Range
200 V
600 V
Input impedance: 9MΩ
Overload protection: 600V AC/DC on all ranges.
3.3 DC Voltage
Range
200 V
600 V
Input impedance:9MΩ
Overload protection: 600V DC/peak AC on all ranges.
3.4 Continuity Test
Buzzer sound when resistance is lower than 75Ω
Overload protection: 300V DC/peak AC
3.5 Resistance
Range
200 Ω
200 KΩ
Overload protection: 250V DC/rms AC
3.6 Environment
Temperature
Relative Humidity
4. Function Characteristics
Measurement method: Dual slope integration
Reading Rate: 3 reading/sec
Polarity: Automatic, indicated minus, assumed plus
Overload indication: Display shows "1"
Power requirements: 1.5V x 2
Battery indication: Display indicates "
Display: LCD, 3½ digit (1999 count)
Data hold: All function and ranges with this feature
Dimension: 193 x 73 x 25mm (L x W x H) approx
Weight: 145 grams (including battery, approx)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Resolution
1 mA
10 mA
1 A
Resolution
100 mV
1 V
Resolution
100 mV
1 V
Resolution
0,1 Ω
100 Ω
Normal operation
Usable condition
Storage
" when approximately 20% of battery life remains.
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Accuracy (50Hz – 60Hz)
±(2,5% +10 Digit)
±(2% +5 Digit)
Accuracy (50Hz – 500Hz)
±(1,0% +5 Digit)
±(1,2% +5 Digit)
Accuracy
±(0,2% +2 Digit)
±(1,0% +2 Digit)
Accuracy
±(1,0% +10 Digit)
±(1,0% +4 Digit)
18°C bis 28°C (64°F bis 82°F)
0°C bis 50°C (32°F bis 122°F)
-20°C bis 60°C (- 30°F bis 140°F)
max. 80% RH
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
Table des Matières
