Arexx Pro Mode D'emploi page 16

Starting up
- First please read this complete manual before you continue.
- More manuals can be found on the CD and in our
Multilogger Software HELP FUNCTION.
- Install the software, please refer to the manual on the CD-ROM!
Always check on www.arexx.com if you have the latest software
E
version at hand.
N
- Connect the USB receiver to the computer.
- Start the program.
G
- Insert batteries in the sensors.
- Consult the help function of the software if you have further
L
questions.
I
Important information about the Temperature Logger
S
- The receiver which is connected to the computer receives
the signals coming from the sensors.
H
- The computer can also collect the sensor data from a LAN
Network.
- The temperature sensors transmit their temperature data to the
receiver.
- Several temperature sensors can be connected to the system
at the same time.
- Separate sensors for the Temperature Logger are available at
your dealer.
- We have connected 60 sensors to one single USB receiver
without any problems.
- The software graphically shows the temperature measurements
of a longer period of time.
- Extra: Attractive screensaver software showing all sensors.
- ATTENTION: The sensors are waterresistant but not
waterproof!
- The range of the sensors can vary as a result of environmental
influences.
Depending on the material properties of the surrounding areas, sensors
located inside refrigerator systems may not be able to communicate with
the receiver.
1. TEMP LOGGER INFORMATION
16