Replacing The Starter Rope And Rewind Spring - Stihl MS 362 C-Q Notice D'emploi

English
N Pull off the spark plug boot.
N Unscrew the spark plug.
Checking the spark plug
N Clean dirty spark plug.
N Check electrode gap (A) and
readjust if necessary – see
"Specifications".
N Rectify the problems which have
caused fouling of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
– Unfavorable running conditions.
32
All manuals and user guides at all-guides.com
If the spark plug comes with a
detachable adapter nut (1), screw
the adapter onto the thread and
tighten it down firmly to reduce
the risk of arcing and fire.
Installing the Spark Plug
A
N Screw home the spark plug, fit the
boot and press it down firmly.
N Fit the shroud.
Replacing the Starter Rope
and Rewind Spring
1
Removing the shroud
N Move the Master Control lever to
stop position (0)
N Push the hand guard forward – the
chain is locked.
1
N Open the twist locks (1) by turning
them 1/4 turn counterclockwise with
the combination wrench.
N Remove the shroud (2).
1
2
1
MS 362 C-Q