Parts And Accessories - Simplicity Broadmoor 2691670 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Item 
Tire Inflation Pressure, Rear 
Specifications Chart (Prestige™ Models)
Item 
MODELS
ENGINE
Displacement 
Electrical System
Battery
Oil Capacity 
Spark Plug Gap 
Spark Plug Torque 
Fuel Capacity
TRANSMISSION
Make and Type 
MOWER DECKS 
Width of cut 
Number of Blades 
Cutting Height 
CHASSIS 
Front Wheels Tire Size 
Tire Inflation Pressure, Front 
Rear Wheels Tire Size 
Tire Inflation Pressure, Rear 
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque
values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others; horsepower
values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine
may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety
of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this engine. 

Parts and Accessories

Contact an Authorized Service Dealer. 
22
10 psi (0.68 Bar)
 2691677 
Commercial Series by Briggs & Stratton
810 cc
16-Amp
350 CCA
67 oz
.030 in (.76 mm)
180 lb-in (20 Nm)
3.6 Gal
® 
 Tuff Torq
K72
50 in (127 cm)
3 standard lift  
1.5-4.0 in (3.8 - 10.2 cm)
16 x 6.5-8
12-14 psi (0.82 - 0.92 Bar)  
23 x 10.5-12
10 psi (0.68 Bar)
10 psi (0.68 Bar)
 2691678
® 
with EFI
Commercial Series by Briggs & Stratton
810 cc
16-Amp
350 CCA
67 oz
.030 in (.76 mm)
180 lb-in (20 Nm)
3.6 Gal
® 
 Tuff Torq
K72
52 in (132 cm)
3 standard lift
1.5-4.0 in (3.8  - 10.2 cm)
16 x 6.5-8
12-14 psi (0.82 - 0.92 Bar)
23 x 10.5-12
10 psi (0.68 Bar)
® 
with EFI

Publicité

Table des Matières
loading

Table des Matières