Publicité
Les langues disponibles
Les langues disponibles
User's manual
This fixture can operate in automatic mode with the speed adjustment or in sound triggering
mode with the sound sensitivity adjustment.
GENERAL MAINTENANCE
To maintain optimum performance and minimize wear fixtures should be cleaned frequently.
Usage and environment are contributing factors in determining frequency. As a general
rule, fixtures should be cleaned at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced lamp life and increased
mechanical wear. Be sure to power off fixture before conducting maintenance. Unplug
fixture from power. Use a vacuum cleaner or air compressor and a soft brush to remove dust
collected on external vents and internal components. Clean all glass when the fixture is cold
with a mild solution of glass cleaner or Isopropyl Alcohol and a soft lint-free cotton cloth or
lens tissue. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the
lens. Gently polish optical surfaces until they are free of haze and lint. The cleaning of internal
and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit's
optics. Clean with soft cloth using normal glass cleaning fluid. Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60
days.
TECHNICAL SPECIFICATIONS
POWER: AC Power: 220V AC/ 60 Hz
Power consumption: 6W
Light Source: Quantity: 140 (35 Red, 35 Blue, 35 Green, 35 Yellow)
Dimensions: L445×W160×H110 mm
Weight: 1.2kg
All manuals and user guides at all-guides.com
EAGLETONEDISCODJBANK
eagletone.com
user's manual
• Please keep this User's Manual for future reference. If you sell the unit to another user, be
sure that he also receives this instruction booklet.
• Unpack and check the unit carefully that it has not been damaged during transport before
using the unit.
• Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
• The unit is for indoor use only in a dry location.
• The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
• Disconnect mains power before fuse replacement or servicing.
• Replace fuse only with the same type.
• Make sure there are no inflammable materials close to the unit during operation.
• Use safety cable when fixing this unit.
• In the event of serious operating problem, stop using the unit immediately.
• Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center
and always use the same type of spare parts.
• Do not touch any wires during operation as high voltage might be causing electric shock.
• To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or any
moisture.
• If this unit will not be used for a long period of time, disconnect if from power supply.
www.eagletone.com
eagletone.com
Publicité
