Used Batteries; Storage; Cleaning; Maintenance - Grizzly Tools GGBP-20V2AH-GGNE3-P5-QX Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Green LED lights up: Battery such al-
leged charged.
Red LED lights up: Battery charging.
Red LED flashes: Battery overheated
Red + green LEDs flash: Defective bat-
tery

Used batteries

If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see "Cleaning and Main-
tenance").

Storage

Remove the battery before storing the
unit for longer periods of time (e.g. hi-
bernation).
Store the battery only in a partially
charged state. The state of charge
should be 40 – 60 % over a longer
storage period (two LED lights on the
charge status display (3) illuminate).
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
In order to keep the battery well
charged, avoid exposing the appliance
to extreme heat or cold in storage.
The ideal storage temperature for the
battery is between 0 °C and 45 °C.
Avoid extreme cold or heat during
storage to ensure the battery output is
not adversely affected.

Cleaning

Clean the rechargeable battery (1) and
charger (3) with a dry brush or dry cloth.
Keep the rechargeable battery (1) and
charger (3) away from moisture and sharp
objects.

Maintenance

The equipment is maintenance free.
Waste Disposal/Environ-
mental Protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Electric units do not belong with do-
mestic waste.
Do not dispose of batteries in
household waste, fire (risk of ex-
plosion) or water. Damaged batter-
ies may damage the environment
and your health if toxic fumes or
liquids leak out.
Return the unit and the recharger to a
recycling centre. The plastic and metal
parts employed can be separated out
and thus recycled use can be imple-
mented. Ask our Service-Center for
details.
Dispose of batteries in discharged
condition. We recommend covering
the pole with adhesive tape to prevent
a short circuit. Do not open up the bat-
tery.
GB
19

Publicité

Table des Matières
loading

Produits Connexes pour Grizzly Tools GGBP-20V2AH-GGNE3-P5-QX

Ce manuel est également adapté pour:

Ggbp-20v4ah-ggne3-p6-qxGgch-20v2.4a-ggne2-c1-a1

Table des Matières