Fault Rectification; Environment And Recycling; Guarantie - Stiebel Eltron MEK Notice D'utilisation Et De Montage

3. Fault rectification
for the user and qualified installer
Fault
No hot water despite the hot water
valve being fully opened.
Poor jet formation, fitting spurts
when tap is turned on.
Fitting drips during heating up pro-
cess.
4. Environment and recycling
Dispose of packing material and appliances
The dispose of the packing material and the
appliances must be done according to the lo-
cal recycling laws and regulations.
Cause
No electricity supply on water
heater.
Jet regulator blocked with limes-
cale.
Expansion water
Rectification
User/qualified installer: Check the fuses in the house installation.
User/qualified installer: Clean the jet regulator of the fitting and replace
it if necessary.
Normal occurrence with non-pressurised water heaters. Dripping will
stop when the heating up process has been completed.
For guarantees please refer to the pespective
terms and conditions of supply for your country.
should be carried out by a qualified installer.
The company does not accept liability for
failure of any goods supplied which accor­
dance with the manufacturer's instructions.
5. Guarantee
The installation, electrical connection
and first operation of this appliance
9