Operating Modes; Driving Mode; Parking Mode; Event Recordings - Audi UTR 2.0 Guide De Démarrage Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19

Operating Modes

Driving Mode

The driving mode is automatically started when you start the engine.
Now, video files of one minute length each are being saved on the
SD card.

Parking Mode

The parking mode is started when you turn off the ignition.
In case of a shock to the car or a movement in front of the radar
sensors, a 20 second video file is saved.

Event Recordings

When your car is shaken harder than the set value of the G-Sensor,
separate video files are saved on the SD card in the folder "Event".
You will recognize the beginning of an event recording at the double
beeping sound.
The sensitivity of the G-Sensor can be adopted in 5 levels.

Memory Allocation

The memory card is partitioned into separate areas (Driving, Parking,
Event) by the system. In each partition, the oldest video file at a time
is overwritten by the latest one. For that reason, please make a copy
of the data when something happens. You can download the data
to your smartphone via the UTR app, or remove the SD card (after
turning off the device) to prevent overwriting the files. When you edit
the SD card on the PC and then use it again with the camera, the SD
card is formatted. This means that any existing videos will be erased!

Manually Switching On And Off

A short press of the ON/OFF button switches the device ON.
To switch it OFF, please press and hold the button down longer
(minimum 3 sec.).
14

Publicité

Table des Matières
loading

Table des Matières