Using The Snap Hook; Reset Function; Cleaning - ADE BR 1701 Mode D'emploi

Pay attention to the following:
‚ Use the
‚ If you connect the audio cable to the speaker
during audio playback via Bluetooth, it will switch
automatically to the AUX input.
‚ In AUX mode, the phone function is disabled.
‚ The track control is carried out exclusively via the
external audio device.

Using the snap hook

Do not use the snap hook for other purposes than
intended!

RESET function

The device can stop responding due to electromagnetic
radiation in the environment.
− In this case, press and hold down the
approx. 8 seconds to reset.
After that, the speaker will respond again as usual.

Cleaning

− Clean the speaker with a slightly damp cloth and mild
detergent. Make sure that no moisture penetrates the
device.
32
Druckbuch Bluetooth Speaker 3sprach.indb 32
All manuals and user guides at all-guides.com
button to mute the speaker.
The snap hook can be used
to carry the speaker on a belt
loop.
Bluetooth speaker BR 1701
button for
13.03.2018 11:52:14