Multi-Use Slicer - SEVERIN 3950 Mode D'emploi

GB

Multi-use slicer

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Familiarisation
1. Stainless steel blade
2. Blade mounting
3. Power cord
4. Finger guard
5. End-piece holder
6. Sliding tray
7. Base plate
8. Locking button
9. Sliding tray inside storage compartment
10. End-piece holder inside storage
compartment
11. Recess for power cord
12. Power cord storage
13. Slide lock
14. Thickness selection knob
15. Slice thickness indicator
16. Rating label (on underside of the unit)
17. Stop plate
18. Slicer assembly (stop plate and blade)
19. Push switch
20. Release button (at the rear)
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Important safety instructions
∙ In order to avoid hazards, repairs
All manuals and user guides at all-guides.com
∙ Before cleaning the appliance,
∙ To avoid the risk of electric shock, do
∙ The appliance must be cleaned
∙ We strongly recommend that the
∙ Caution: Any misuse can cause
∙ Caution: The blade is very sharp;
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
ensure it is disconnected from the
power supply and has cooled down
completely.
not clean the appliance with water
and do not immerse it in water.
regularly. For more detailed
information, please refer to the
section Cleaning and care.
appliance is only used with the
sliding tray and end-piece holder
properly installed and in position.
Exceptions may be made only if
required by the size or shape of the
food to be sliced.
severe personal injury.
extreme care should be taken when
9