Troubleshooting - Sharp IG-BC2A Manuel D'utilisation

TROUBLESHOOTING

Problem
The Plasmacluster Ion Generator
does not work.
Flashing
faster (red)
Flashing (red)
A discontinuous noise is heard.
A clicking or ticking sound
comes from the unit.
The air fl ow decreases.
The discharged air has odor.
IG-BC2A.EN.indd 13 IG-BC2A.EN.indd 13
All manuals and user guides at all-guides.com
•
Is a Car Adapter connected properly?
Please be connected defi nitely.
• Does a fuse blow?
Replace with a new fuse. (See E-10)
It is over the exchange period of Plasmacluster
FILTER
Ion Generating Unit.
CLEAN
Replace with new Plasmacluster Ion Generating
UNIT
Unit. (See E-9)
If all lights keep fl ashing, replace with new
Plasmacluster Ion Generating Unit.
UNIT
Plasmacluster Ions are not released.
Press the Operation Button and restart.
Flashing (blue)
Failure
Unplug and contact the store you purchased or
UNIT
Sharp Service Center.
Flashing (blue)
• Clicking or ticking sounds may be audible when
the unit is generating ions.
• Dust may block the fi lter, clean the fi lter.
(See E-8)
• Wind quantity sometimes becomes strong
during operation with LOW mode, to confi rm
the condition of ion be not abnormal.
• Filter is getting dirty.
Clean the fi lter. (See E-8)
• The Plasmacluster Ion Generator releases a
small trace of ozone which may produce odor.
This is not detrimental to health.
E-11
WHAT TO DO
2010/01/12 10:12:49 2010/01/12 10:12:49