Samsung UE105S9W Mode D'emploi page 15

Using the Samsung Smart Control
Samsung Smart Control makes it even easier and more convenient to use the TV. Pressing the
KEYPAD button displays a virtual remote control that allows you to easily enter digits, control
content, and activate functions on the screen.
- We recommend using Samsung Smart Control at a distance of less than 6m. A usable
distance may differ depending on the wireless environmental conditions.
Pairing the Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the
TV via Bluetooth. Pair Samsung Smart Control to the TV.
- Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the
turn the TV on.
- Remote control receiver's location may vary depending on the model.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this
may be due to insufficient battery power.
If the problem persists, the Samsung Smart Control restores pairing with the TV.
1. Press both the
RETURN
seconds.
- You must place the Samsung Smart Control approximately 30cm ~ 40cm away from
the TV and ensure it is pointing towards the remote control receiver.
2. Connection image is appeared on the screen. And then, Samsung Smart Control is
connecting to TV automatically.
When you see this alarm icon on the screen...
button to
TV
<Low battery Alarm Icon>
Using the TV by Moving the Samsung Smart
Control
The Samsung Smart Control has a motion sensor (gyro sensor) that allows you to easily control
the TV by holding and moving the Samsung Smart Control.
After placing a finger on the touchpad, a pointer appears on the screen. Hold and move the
Samsung Smart Control. The pointer moves the same way the Samsung Smart Control is
moved. It's also possible to scroll up and down on scrollable screens.
- If you remove the finger from touchpad, the screen pointer disappears.
English - 15
button and the button simultaneously for more than 3
GUIDE
Following alarm icon indicates Samsung Smart Control's
batteries are low. If the alarm icon pops up, replace the
batteries. Samsung recommends using alkaline batteries
for a longer operating life.