Regalo 2020 Guide D'utilisation page 9

STEP 2
Once the bed rail is properly placed, check
to make sure the left and right swing lock
and strap assemblies are parallel to one
another. Then, place the mattress on top of
the assembly.
NOTE: In order for the bed rail mesh wall to be firmly held against the side
of the mattress you MUST properly tighten the anchoring straps. Please
follow the next STEPS 3 – 4 carefully.
STEP 3
Tighten the straps to bring the bed rail into its proper position. To tighten the
straps, first release the strap locks on the under side of the left and right under
bars. Pull the straps towards you until all the excess slack has been pulled out
from under the mattress.
English 9