Regalo 2020 Guide D'utilisation page 11

STEP 5
With your bed rail in the 'up' position push down on the locking tabs to secure
your bed rail in place.
NOTE: After locking both buckles, check to make sure that the mesh wall of
the bed rail is firmly up against the side of the mattress. There should be NO
GAPS. If the mesh wall is not firmly against the side of the mattress, check to
make sure the locking buckle is functioning properly and that the strap is not
twisted beneath the mattress. Once this has been checked and corrected if
needed, unlock the buckle, pull on the end of the strap tightly and lock the
buckle again.
Store the excess anchoring strap material by tucking it under the mattress.
Do not cut excess strap, may cause strap to fray.
LOCKING TAB
English 11