Chapter3: Dab/Dab+ Mode; Access To Dab/Dab+ Mode; Scanning For Stations - Albrecht DR333 Guide D'instructions

Chapter 3: DAB/DAB+ Mode

3.1 Access to DAB/DAB+ Mode

DAB mode receives DAB/DAB+ digital radio and displays information about the station, stream
and track playing.
Touch to enter DAB/DAB+ mode.
Or press DAB via remote control to enter DAB/DAB+
mode.
In use, the last listened station is automatically
selected.

3.2 Scanning for Stations

The first time you select DAB radio mode, your
radio will automatically perform a full scan to see
what stations are available.
You may also need to start a scan to update the
list of stations for one of the following reasons:
Available stations change from time to time.
If reception was not good for the original scan (for example the antenna was not up),
this may result in an empty or incomplete list of available stations.
If you have poor reception of some stations, you may wish to list only stations with
good signal strength.
To start a scan manually touch
Once the scan is complete, the radio shows a list of available stations.
To scan stations with a good signal strength only, touch
To remove existing inactive stations, touch
> Scan (or directly press SCAN via remote control).
> Prune invalid stations.
10
> Manual tune.