Track Search - LEXIBOOK CD200i Mode D'emploi

CLEANING COMPACT DISCS
1.Fingerprints should be wiped from the surface of the disc with
a soft cloth. Unlike conventional vinyl records, compact discs
have no grooves to collect dust and microscopic debris, so
gently wiping them with cloth should remove most of the
particles. Wipe in a straight motion from the centre to the outer
edge of the disc.
2.Never use chemicals such as record cleaning sprays, antistatic
sprays, benzene or thinner to clean compact discs. Such
chemicals can damage the plastic of the disc.
The unit will not play a disc that has been inserted upside down, or discs that
●
do not comply with Compact Disc standards. Also, the unit may not play discs
that are scratched, soiled or have fingerprints on them.
3" (8cm) CDs can be played without an adaptor.
●
PLAYING A CD
Be sure to reduce the volume before plugging or unplugging the headphones/earphones.
1. Plug the cord from a pair of headphones/earphones into the HEADPHONES jack [11].
2. Slide the OPEN switch [13] to open the CD door.
3. Hold the disc with the label facing up and press it onto the spindle until it "snaps" in
place.
Close the CD compartment, press the PLAY/PAUSE button [5], the disc will begin to
spin, and after several seconds the total number of tracks in the CD, and the total
playing time will show on the display, the player will start playing track number 1
automatically.
7 Copyright © Lexibook 2004
All manuals and user guides at all-guides.com
5. Adjust the volume as desired using volume control knob [10].
6. Set the Bass Boost function [16] as desired (see page 9).
7. To temporarily stop, press the PLAY/PAUSE button [5]
The elapsed playing time flashes in the display.
●
Press the PLAY/PAUSE button [5] again to resume play.
●
8. To stop play, press the STOP button [8]. The total number of tracks and total playing
time will appear in the display. Press the STOP button [8] once again and power of the
unit will be immediately turned off.

TRACK SEARCH

9
With the unit switched on, press the [2] or [3] button during play to skip to the
desired track
1.Press the button [3] to skip to the next track on the disc.
2.Press the 9 button [2] to skip to the beginning of the track currently playing.
3.Press the 9 button [2] twice or more to skip to previous tracks.
SKIP BACKWARDS / FORWARD SEARCH
9
Press and hold the [2] or [3]button during playback to scan the disc at high
speed. When the desired section of the disc is found, release the button.
Normal play will resume.
FWD ................................... FORWARD
9 BACK ................................ REVERSE
1. If you press and hold the button [3] during playback, it will scan the current track
forward at high speed.
9
2. If you press and hold the button [2] while playing, it will scan the current playing
track backward at high speed.
Copyright © Lexibook 2004
8