Fagor IFA-80 BF Guide D'installation Et D'utilisation page 17

4 4 / SPECIAL MESSAGES, DIFFICULTIES
You have doubts about whether your hob is working correctly. This does not
necessarily mean that there is a breakdown. Nevertheless, check the following
points.
P R O B L E M
When you switch the unit on, the
supply-line breaker trips off or the
supply-line fuse burn.
When you switch elements on, only
one element works.
The fans keep running for a few
minutes after the unit has been
switched off,
The top of the unit is always
lukewarm (even when elements are
not switched on).
Your hob makes faint clicking noise
when in operation.
The unit doesn't work at all.
After turning an element ON and
having utensil placed on the coil,
there is no heat and the digital
indicator continues flashing..
Utensil makes noise during cooking.
The hob gives off a smell when first
used for cooking.
Servicing of an induction unit is to be done by an authorized
service agent. Contact your dealer for service location closest to
If any crack on the vitroceramic glass can be noticed, or the glass
is broken DO NOT USE THE UNIT. Disconnect the electrical
supply to the unit by tripping the breaker off (if the unit is hard-
wired to the supply) or just unplug the unit (if there is a plug on
P O S S I B L E E C A U S E S
Your unit may be connected
incorrectly,or there is an
internal problem.
There is an internal problem
with the unit.
The electronics are cooling
down
he electronic components are
T
under power and they create
heat.
This noise occurs when the power is
being shared between two
induction coils.
There may be a power supply
or internal problem.
The utensil you are trying to use
is not compatible with induction
cooking or its diameter is under
10 cm. (4").
Your utensil creates noise from
vibrations caused by induced
current .
A new unit
your residence. Never try servicing the unit yourself.
W H A T T S H O U L D D Y O U U D O ?
the supply cable).
16
Have the connection checked
first. If the connection is OK,
contact your service agent.
Contact your service agent.
This is a normal occurrence.
This is a normal occurrence.
This is a normal occurrence.
Check your beakers (fuses)
and/or connection cable.
If OK, contact your service agent.
Use another utensil suitable for
induction cooking.
Under high power this
phenomenon is normal with some
types of pots and pans. There is
no danger for the hob.
Use each heating element for an
hour with a pan filled with water.
9 9 9 9 6 6 4 4 5 5 8 8 2 2 1 1 02/08