weBoost eqo U474020 Guide De L'utilisateur page 7

•If your window does not open, skip steps 2 & 3.
•If this is the case, it is important to have the Booster (Step 1) in the window
sill with the weBoost logo facing inside the house.
•If you don't have a screen to hold the outside antenna, use the included
double-sided adhesive to stick the antenna against the window.
•For areas in full basements, place outside antenna as high on the window
as possible.
PLEASE NOTE: If your window does not have Low-E glass, it is best to use the booster
without the outside antenna. Most new windows use Low-E glass. If you're unsure, test
results both with and without using the outside antenna. Just remember to disconnect
the outside antenna cable from the booster if you're not using the outside
______
Step 4: Connect 25' Cable to
Booster Unit Port Labeled
"Antenna"
25' Cable
CELL PHONE SIGNAL BOOSTER
3
Close window (Don't worry, the flat
cable will be okay)
antenna.
5