Initial Operation - Simons Voss Technologies RouterNode Guide Abrégé

RouterNode (GatewayNode)

6 Initial operation

EN
RS-485:
Versions with RS-485 connection have an internal DIP
switch. Both DIP switches are in the ON position in the
factory version.
1. Unpack the RouterNode.
2. Check the RouterNode for damage.
3. Screw the antenna onto the FME socket (wireless
versions only).
4. Make sure that the power supply complies with the
technical data (see
[ 23]
).
}
5. Connect the network cable or the RS-485 cable.
6. Initial operation
Incoming line
Outgoing line
Technical specifications
21 / 88