AKO BK 1201 Instructions De Montage Et D'utilisation page 7

To process your order, the device type, the production
number (E number) and the device's production date
(FD number) are required. These specifications can be
found on the device's type plate. Repairs and correc-
tive measures must only be carried out by a qualified
electrician or the after-sales service.
4. Cleaning
Switch off the device and let it cool down before clean-
ing it.
Caution! Do not touch the reflector or heating element
with bare hands.
The outer surfaces of the device can be cleaned with a
damp cloth and then dried thoroughly.
No scouring agents or polishes should be used.
Dust which gathers inside the device can be removed
using a brush with soft, long bristles.
If the device is heavily soiled, it should be cleaned by a
specialist.
5. Changing the Heating Element
A heating element may only be changed by a special-
ist.
Disconnect the device from the power supply and allow
it to cool.
Do not touch the heating element or reflector with bare
hands.
Use a cloth to protect the surface.
A
B
Loosen the front grill screws (A) and remove the
front grill.
Remove push-on connections using a suitable tool.
Pull out the two fixing brackets (B).
Remove the heating element.
Insert new heating element.
Carry out assembly in reverse order.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D-95326 Kulmbach
Subject to modifications without prior notice
www.dimplex.de/en
All manuals and user guides at all-guides.com
bk-bs-gb-ba · 05/15/D
BK 1201, BK 2001, BS 1201, BS 1801
6. Technical Data
BK 1201 BK 2001
Nominal 1,2 kW 2,0 kW
power
Dimen- 768 x 100 x 92 mm
sions
(W x H x D)
Weight 1.60 kg 1,70 kg
Connection voltage: 1/N/PE 230 V~
Degree of protection: IP24 (splash-proof)
Protection class: I (with protective conductor)
7. Warranty
This product is supplied with a two-year warranty ac-
cording to our terms of guarantee.
8. Note on Disposal
Do not dispose of the unit with general house-
hold waste. The unit must be taken to a local
waste disposal plant.
Phone number: +49 9221 709 564
Fax: +49 9221 709 589
E-Mail: 09221709589@dimplex.de
www.dimplex.de/en
BS 1201 BS 1801
1,2 kW 1,8 kW
526 x 140 x 92 mm
1,55 kg 1,65 kg
EN-7