ALPATEC DH 25 D Notice D'utilisation page 15

All manuals and user guides at all-guides.com
notice DH_25D:notice DH_25EC
STARTING.
- Plug the unit.
- Press button ON / OFF (18), the unit start working in continuous mode.
- Press button mode (17) to select the humidity rate (or continuous mode). You can select 50%, 60%,
70% or 80%.
- Press button fan speed (16) to choose the ventilation speed (high or low).
- The air outlet direction can be adjusted.
- If you want to use the heating mode, press button (12).
- Heating mode allows the product to work at low temperature down to 5°C.
- The humidity rate is displayed on the screen. If you want to display the temperature, then press
MODE (17) button for a few seconds.
- Press button ON / OFF (18) to stop the appliance.
WATER TANK FULL.
- When the water tank is full, the product stops, the water full indicator (C) flash and the water level
window (4) turns to red. A sound « bip » can be heard several times.
- Take out and empty the water tank before you put it back.
Please note that if the water tank has not been positioned well the water level window (4) remains red
and the water full indicator (C) keeps on flashing.
TIMER.
- You can use the timer to automatically stop the appliance.
- When the product is running, press touch timer 14. Each pressure adds 1 h from 1 to 24 hours. Once
the time has gone, the product stops.
- To cancel the timer, press touch 14 till the remaining time disappears from the screen.
19/11/09 11:37 Page 15
OPERATION INSTRUCTION
Water full indicator
15