Timer Mode - Responder LE VIPER 9252 Guide D'instructions

Timer Mode

This unit can be programmed to start and run the engine every three
hours, for a maximum of six cycles. The engine will run for the pro-
grammed run time and then shut down. After three hours, the system
will restart the engine.
Note: This feature works only when the system has been locked with
the remote control.
Important: Timer Mode should be used in open areas only. Never start and
run the vehicle in an enclosed space such as a garage or carport.
To activate timer mode with an automatic transmission:
1. Press twice and then press
2. The parking lights quickly flash four times to confirm timer mode
entry. (The vehicle will not remote start at this point.)
3. The vehicle begins the timer mode sequence
To activate timer mode with a manual transmission:
1. Enter the MTS mode.
2. Exit the vehicle and lock the system.
3. Enter the timer mode. The parking lights quickly flash 4 times to
confirm entry into timer mode (vehicle will not remote start at this
point). The vehicle begins the timer mode sequence.
Timer Mode is exited automatically after the sixth run cycle. The park-
ing lights slowly flash 4 times when exiting timer mode.
To exit timer mode with the transmitter:
Press the button twice and then press
slow four times to confirm timer mode is exited.
© 2009 Directed Electronics. All rights reserved.
All manuals and user guides at all-guides.com
.
.
. The parking lights flash
9