Argus AA300 Manuel De L'utilisateur page 12

Pn: 400-2000 Rev.03-1106
All manuals and user guides at all-guides.com
For more detailed operating instructions and user information, consult the full users
manual provide with each analyzer, or download one at www.argusanalyzers.com/support
Quick TesTing guide:
AA300, AA350, AA400, AA500p
safety
Inspect the battery for damage or leaks. Remove watches,
rings, metal bracelets. Clean terminals. Keep tools, cables and
clamps away from moving engine parts.
connect the Analyzer
1. If possible, charge battery before testing.
2. Always connect the analyzer directly to the battery posts.
3. Connect red clamp to "+" terminal, and black clamp to "-"
terminal. Rock clamps to maximize contact.
setup
1. Set the battery type: Use the browse button(s) to change
values. Use
2. Set rating standard: Use the browse button(s) to change
values. Use
3. Enter rated value from battery label (350, 400, 500P only): Use
the browse button(s) to change values. Use
Test the Battery
Follow prompts on screen to initiate tests. (300, 400, 500P only)
= enter/select
= start engine
navigating
Use to change test screens.
n
>
Use the or
n
within a test screen.
to select.
to select.
<
to display test results
EN
to select.